1. Many users may tighten the screw barrel too tightly, and the screw barrel will make abnormal noise. First, adjust the tightening wire.
2. Maybe the coupling between the wire feeding motor and the screw barrel is worn, and the screw barrel also makes a strange noise. Just replace it.
3. Broken molybdenum wire has entered the connection of the wire barrel seat, causing abnormal noise, and the broken wire needs to be taken out.
4. It may be that the motor is noisy. You need to remove the motor and turn it on. If the motor does not make a noise at this time, it must be a problem in use. Then check whether the belt or gear is noisy. If the motor is noisy, the motor shall be repaired. You can also replace the bearing in the motor first, and then check the motor.
5. Moreover, the bearing in the screw barrel may not match, which will cause abnormal bearing noise after a period of time. It is recommended to replace it with a heavy bearing.
6. For abnormal noise of the tooth belt or gear, check whether the tooth belt or gear is excessively worn, and replace it in time. If the meshing clearance is improper, adjust the meshing clearance in time.
7. The excessive load force from the screw barrel to the lead screw will cause friction or impact sound, which will soon damage the relevant parts. The abnormal phenomenon of this part should be stopped and carefully searched until it is eliminated.
After reading the sharing brought by Xiaobian, if you are interested in our products, please contact us in time, and we will serve you wholeheartedly. Welcome to inquire!
